An in-ground interceptor collects grease and food solids as wastewater leaves the kitchen. If buildup covers the outlet tee or narrows the flow path, drains can run slowly and internal parts may be harder to check. Standing water in a sink can also point to a blocked line, so the symptom alone does not identify the cause. Call to describe the problem to a provider who serves your area.
Call (877) 704-1271 to reach a provider →
How interceptors differ from indoor traps
Indoor grease traps are generally smaller units near kitchen fixtures. An interceptor is usually a larger tank below ground outside the building, where it receives wastewater from the kitchen.
Both hold back grease and solids, but their access points and cleaning needs differ. An outdoor tank may have separate access lids over its internal compartments. Knowing which equipment you have helps you describe the job and ask about the right service.
What thorough cleaning includes
- Removing accumulated grease, water and settled solids from the tank.
- Clearing residue from tank walls and accessible surfaces after pumping.
- Using water jetting where needed to loosen stubborn buildup.
- Cleaning around inlet and outlet tees so openings can be checked.
- Clearing grease from baffles and looking for visible damage.
- Checking and cleaning the sample box if the system has one.
Ask the provider which steps are included and request written details of the work and any visible problems.
Confined space considerations
An interceptor is a confined space where hazardous gases can collect and oxygen can be scarce. Opening a lid does not make it safe to enter or lean inside.
Cleaning is generally done from above with hoses and tools through the access openings. Leave entry and any work that requires it to a provider equipped to handle confined-space hazards. Keep kitchen staff away from open lids during service.
Inspecting tees, baffles and lids
Tees guide wastewater into and out of the interceptor. Grease can hide cracks or block an opening, so exposed parts are easier to check after cleaning.
Baffles help separate the flow inside the tank. Ask whether any visible baffle is loose, damaged or missing, and keep a note of the finding.
Lids should sit securely over access openings. Damaged lids or frames can create a safety concern, so ask about any visible defects and what repair may involve.
How buildup affects inspections
Heavy grease and solids can make it difficult to see the outlet tee, baffles and tank condition. Buildup in a sample box can also make it harder to collect a representative wastewater sample.
Keep service records that show the work performed and any problems noted. Your city or sewer district sets local requirements, so check what records and maintenance information you need to have available for an inspection.
What affects the price of interceptor cleaning
The tank's capacity and the amount of grease and solids inside can affect the work involved. Access matters too: buried lids, a crowded loading area or a long hose run may make the job more complicated. Jetting, sample box cleaning and disposal requirements can also affect the quoted price. Describe the equipment and access conditions when you call, and ask which cleaning steps and service records are included.
Grease interceptor cleaning questions
Is interceptor cleaning different from interceptor pumping?
Pumping removes the accumulated contents from the tank. Cleaning also addresses residue on accessible walls and parts, including tees and baffles. Ask which steps are included and whether the sample box will be checked.
How do I find my interceptor?
Look for access lids outside the building, often near the kitchen or loading area. Building plans or past maintenance paperwork may show the location. Do not open a lid yourself; leave access to the provider.
What if parts inside are broken?
Ask the provider to document visible damage and explain which part needs attention. A broken tee or baffle can affect how the interceptor works, so discuss repair options before further problems develop.
Can cleaning happen while the kitchen is open?
That depends on access to the interceptor and whether wastewater can flow into it during the work. Discuss kitchen hours and water use with the provider so you can plan around service.